Care & Maintenance

At iQ Shutters, we build for Queensland conditions, but the coast, sun, and everyday use still call for simple, regular care. Below is a quick reference for day‑to‑day cleaning and long‑life maintenance across our product range.

Aluminium Shutters (internal & external)

• Regular clean: Soft brush‑down, then a bucket of lukewarm water with a mild pH‑neutral detergent. Rinse, wipe dry.
• Frequency: Internal every 2–3 months; coastal/external monthly.
• What to avoid: Abrasive pads, solvent cleaners, and pressure washers directly on joints.
• Tip: Pay attention to water traps (bottom rails, hinge sides). Wipe dry to protect the powder coat.

Poly & Timber Shutters

• Poly: Light dusting; wipe with a damp microfibre cloth and mild detergent. Dry immediately.
• Timber: Dry dust only; if needed, a slightly damp cloth, then dry.
• Avoid: Steam, excess water, polishes containing silicone or wax build‑up.

Roller Blinds (sunscreen, light‑filter & blockout)

• Regular cleaning: Close the blind, dust with a soft brush or vacuum on low suction with a clean upholstery head.
• Spot clean: Dab (don’t rub) with lukewarm water and mild detergent; support the fabric from behind or underneath.
• Avoid: Harsh chemicals, soaking, or scrubbing the blockout backing.

Curtains

• Day‑to‑day cleaning: Shake out dust; use a garment steamer lightly from a distance to relax creases.
• Deep clean: Follow fabric label; most are professional dry‑clean only.
• Avoid: Machine washing unless the fabric label explicitly allows it.

Zipscreens & External Awnings (drop arm, folding arm, multistop)

• Fabric clean: Hose gently, sponge with mild detergent, rinse well, dry before rolling up.
• Hardware: Wipe arms, brackets, and extrusions with pH‑neutral detergent; check fasteners.
• Avoid: Rolling away for long periods when wet – this encourages mould.

Security Screens

• Mesh & frame: Wash with pH‑neutral detergent, soft brush or sponge, then rinse.
• Frequency: Inland every 2–3 months; coastal monthly.
• Avoid: Harsh chemicals and abrasive tools. 
• Tip: Rinse salt spray regularly to protect the finish.

Motors & Remotes

• Motors: Keep dry; don’t spray lubricant into motor heads.
• Remotes: Replace batteries as required; keep out of direct heat.

If operation changes: Check power, receiver light, and battery first before calling support.